JUMO LOGOSCREEN 550 cf, Operating Manual

Page: 45 / 138

45
3 Operation and visualization
Counter/
integrator
reset After the password has been successfully entered, the counts for each of the 6
channels can be set to 0 or a defined value in this menu.
When a value has been entered (confirm with the
E
key), a message with
the new and old count is entered in the event list. The time period for the
counter/integrator summation will not be restarted. The previous counter/
integrator values will also not be saved. If you wish to do so, you have to carry
out Update CF card incl. counters in the CompactFlash card menu before
resetting.
In this way, the recording can be freshly started for counters/integrators, e.g.
after the test run of an installation. The test run values that are not required will
be eliminated in the process.
You can select a password that is different from that for accessing the
configuration. The default value is also 09200.
The password can be set in the menu Configuration
➔
Device data
➔
Code
No. (password)
➔
Reset counter/int.