dTRANS T
/S08 PCU
6
V1.00/EN/00698632 - 70710100T90Z001K000
Flexible supply
The technical specifications specifies the maximum required power at nominal operating values, e.g. 24 V supply voltage,
70°C ambient temperature, 600 Ω load, and 20 mA output current.
(*) External fuse characteristics:
The 2.5 A fuse must break after not more than 120 seconds at 6.4 A.
Protective fuse: 2.5 A.*
Power rail solution #1:
Alternately, you can connect 24 VDC to any
one JUMO dTRANS T/S08 device with power
rail connector which will then energize other
units on the rail.
Protective fuse: 2.5 A.*
DIN rail solution - device daisy chain:
The JUMO dTRANS T08 01, T08 02, T08 11, T08 12
and T08 13 can be supplied with 24 VDC ±30% via
direct wiring and a loop between the devices.
Power rail solution #2:
The JUMO dTRANS T/S08 PCU power
connector unit allows easy connection of a
24 VDC / 2.5 A source to the power rail.
Protective fuse: 0.4 A.
Note:
Device type JUMO dTRANS T08 01, T08 02, T08 31, T08 33 and T08 37 can only be supplied
via the DIN rail solution with direct wiring on each device.
