JUMO dTRANS T02 Ex, Operating Instructions Manual

Page: 31 / 56

1
1 Intended use / Conformity with standards
Intended use
The JUMO dTRANS T02 Ex type 956525/... transmitter is used for
converting the signals from resistance thermometers,
thermocouples, resistance, voltage and current sources into
standard 0 — 20mA, 4 — 20mA or 0 — 10V signals.
Input, output and additional configuration parameters can be freely
set through the PC program, via an interface.
The transmitter is intended for rail mounting outside the hazardous
area.
Conformity with standards
The fundamental safety and health requirements are fulfilled
through compliance with the following standards:
- EN 50 014+A1+A2: 1997
- EN 50 020: 1994
- EN 61 326-1: 1997