JUMO 705043, Installation Instructions Manual, Page: 35 / 82

7
1 Introduction
1.4 Acceptance of goods, storage, and transport
1.4.1 Checking the delivery
• Ensure that the packaging and its contents are undamaged
• Check the delivery for completeness against the packing slip and order details
• Inform the supplier immediately if there is any damage
• Store damaged parts until clarification is received from the supplier
1.4.2 Important information about storage and transport
• Store the device in a dry, clean environment. Observe the admissible ambient conditions (see "Tech-
nical data")
• Protect the device from shock during transport
• The original packaging provides optimum protection for storage and transport
1.4.3 Returning goods
If repairs are needed, return the complete device in clean condition.
Use the original packaging to return goods.
Accompanying letter for repair
Please include the completed accompanying letter for repair when returning goods.
Do not forget to state the following:
•
Description of the application and
• Description of the error that has occurred
The accompanying letter for repair (supplementary sheet for product returns) can be downloaded online
from the manufacturer's website:
http://productreturn.jumo.info
Protection against electrostatic discharge (ESD)
(ESD = electrostatic discharge)
To prevent damage due to ESD, electronic modules or components must be handled, packaged, and
stored in an ESD-protected environment. Measures that protect against electrostatic discharge and elec-
tric fields are described in DIN EN 61340-5-1 and DIN EN 61340-5-2 "Protection of electronic devices
from electrostatic phenomena".
When sending back electronic modules or components, please note the following:
•
Pack sensitive components only in an environment providing protection against ESD. Workspaces
such as this divert electrostatic charges to ground in a controlled manner and prevent static charges
due to friction.
• Use only packaging intended specifically for ESD-sensitive modules/components. These must con-
sist of conductive plastics.
No liability can be assumed for damage caused by ESD.
CAUTION!
Electrostatic charges occur in non-ESD-protected environments.
Electrostatic discharges can damage modules or components.
 For transport purposes, use only the ESD packaging provided.