Jumil JM 2640 EX PD, Operator'S Manual

Page: 6 / 51

Manual de Instruções JM 2640 EX PD
6
2 - SAFETY STANDARDS
When JUMIL manufactures its Agricultural Machines and Implements
has the main objective to thel the Man to develop a better LIVING
STANDARD. However, in the use of these machines some cares must be
RESPECTED:
DO NOT DESTRUCT THE UNVIERSAL BIOLOGICAL
EQUILIBRIUM WITH INCORRECT AGRICULTUEAL WORKS.
NOR ALLOW THE MACHINE TO DESTRUCT IT. OBSERVE
STRICTLY THE SAFETY STANDARDS. BE ATTENTIVE !
1) Always use the appropriate stairs and rails to get on or off the
tractor.
2) When starting the motor, be correctly sat on tractor operator´s
seat and ABSOLUTLY AWARE of the complete knowledge of the use of
tractor and equipment. Always use the tractor neutral gear, switch off the
power takeoff and put the hydraulic command in a neutral position.
3) Do not use the tractor in closed rooms as the smoke from the
exhaust pipes are toxic gases.
4) When maneuvering the tractor to be hitched to machine or
implements, make sure there is enough room and there is nobody around,
make the maneuvers in
SLOW GEAR and be prepared to brake it in an
emergency.
5) When using equipments DRIVEN BY THE POWER TAKEOFF
(to hitch, to unhitch or to adjust) STOP THE POWER TAKEOFF, STOP
THE MOTOR AND REMOVE THE KEY FROM THE IGNITION. BE
ATTENTIVE !
6) When using loose clothes, always take care, do not get closer of
the moving parts, your clothes can touch them and cause accidents.
7) Do not make any adjustment when the machine is being operated.
8) When working with implements or machines.
IT IS STRICTLY
FORBIDDEN THE TRANPOSRT OF ANY OTHER PERSON BEYOND THE
OPEARTOR, AS ON THE TRACTOR AS ON THE IMPLEMENT
, in case
there is a seat or appropriate platform for this finality.
9) When working in steep areas, work with a total attention, always
keep the necessary stability, in case of a lack of equilibrium, reduce the
acceleration and keep the equipment on the soil then turn the tractor wheels
to a descendant position.
10) On down the hills, always keep the tractor in geared position,
the same you would us to go up.
11) When transporting the machine hitched to the tractor or turning it
at the crop corners, we recommend you to take care, by reducing the
speed to prevent force on the toolbar or drawbar.