BURNER MAINTENANCE C
Bend a stiff wire, (a lightweight coat hanger works well) into a small hook as shown below. Run the hook
through the burner tube and inside the burner several times to remove any debris.
Use a bottle brush with a flexible handle.
removing any debris.
Use an air hose to force air through each burner tube. The forced air should pass debris or obstructions
through the burner and out the ports.
1. Regardless of which burner cleaning procedure you use, we recommend you also complete the
following steps to help prolong burner life.
2. Use a wire brush to clean the entire outer surface of each burner until free of food residue, and dirt
3. Clean with clogged ports wire, such as open paper clip.
Inspect each burner after installation, check to ensure that the gas valve orifices are correctly placed inside
the end of the burner tubes. Also check the position of your spark electrode.
Burner Port Burner Tube
STORAGE
1.
Ensure the grill is properly cooled.
2.
Storage of this gas grill indoors is permissible only if the gas cylinder is disconnected and removed from
the grill.
3.
Store the grill in a cool dry place.
4.
Always disconnect the gas cylinder and store it in a safe place, never store a gas cylinder on its side.
5.
Never store a gas cylinder in a building, garage or any other enclosed area.
6.
If you intend to leave your grill outside make sure it is protected from the elements by a heavy
(not included).
7.
Keep outdoor cooking gas grill area clear and free form combustibl
flammable vapours and liquids.
IMPORTANT INFORMATION
This product is for outdoor use only. Do not use indoors. Do not use below ground level.
Do not store gas cylinders below ground level. LP gas is heavier than air so if a
will collect at a low level and could ignite in the presence of a flame or spark.
Do not store or use LP gas cylinders on their side as this could allow liquid gas into the supply pipes
with serious results.
Burner
BURNER MAINTENANCE CONT.
Bend a stiff wire, (a lightweight coat hanger works well) into a small hook as shown below. Run the hook
through the burner tube and inside the burner several times to remove any debris.
Use a bottle brush with a flexible handle. Run the brush through the burner tube and inside the burner several times,
Use an air hose to force air through each burner tube. The forced air should pass debris or obstructions
which burner cleaning procedure you use, we recommend you also complete the
following steps to help prolong burner life.
2. Use a wire brush to clean the entire outer surface of each burner until free of food residue, and dirt
ports wire, such as open paper clip.
Inspect each burner after installation, check to ensure that the gas valve orifices are correctly placed inside
the end of the burner tubes. Also check the position of your spark electrode.
gas grill indoors is permissible only if the gas cylinder is disconnected and removed from
Always disconnect the gas cylinder and store it in a safe place, never store a gas cylinder on its side.
a gas cylinder in a building, garage or any other enclosed area.
If you intend to leave your grill outside make sure it is protected from the elements by a heavy
Keep outdoor cooking gas grill area clear and free form combustible materials, gasoline and other
IMPORTANT INFORMATION
This product is for outdoor use only. Do not use indoors. Do not use below ground level.
Do not store gas cylinders below ground level. LP gas is heavier than air so if a
will collect at a low level and could ignite in the presence of a flame or spark.
Do not store or use LP gas cylinders on their side as this could allow liquid gas into the supply pipes
Bend a stiff wire, (a lightweight coat hanger works well) into a small hook as shown below. Run the hook
Run the brush through the burner tube and inside the burner several times,
Use an air hose to force air through each burner tube. The forced air should pass debris or obstructions
which burner cleaning procedure you use, we recommend you also complete the
2. Use a wire brush to clean the entire outer surface of each burner until free of food residue, and dirt
Inspect each burner after installation, check to ensure that the gas valve orifices are correctly placed inside
To clean burner tube,
insert hook here
gas grill indoors is permissible only if the gas cylinder is disconnected and removed from
Always disconnect the gas cylinder and store it in a safe place, never store a gas cylinder on its side.
If you intend to leave your grill outside make sure it is protected from the elements by a heavy-duty cover
e materials, gasoline and other
This product is for outdoor use only. Do not use indoors. Do not use below ground level.
Do not store gas cylinders below ground level. LP gas is heavier than air so if a leak occurs the gas
will collect at a low level and could ignite in the presence of a flame or spark.
Do not store or use LP gas cylinders on their side as this could allow liquid gas into the supply pipes
