Julabo FT402 Operating Manual Download Page 4

Operating manual 

 

Operating manual 

1. Intended 

use 

JULABO immersion coolers have been designed for temperature application to specific fluids 
in a bath tank. 
For example:  

Dewar vessels, beakers, or other containers in conjunction 

   with 

heating 

circulators 

for continuous countercooling 

   or 

for 

dry-ice 

substitution. 

 

JULABO immersion coolers are not suitable for direct temperature control of 
foods, semi-luxury foods and tobacco, or pharmaceutical and medical products. 
Direct temperature control means unprotected contact of the object with the bath 
medium (bath fluid). 

 

1.1. Description 

 

 

PID1

 

Pt100

 

 

IEC

    EN 

        DIN

 

;

 

The immersion coolers are operated via the keypad. The implemented 
microprocessor technology allows to set and to store the setpoint that can 
be indicated on the LED temperature display. 

;

 

The PID temperature control adapts the cooling supply to the thermal 
requirements of the bath. 

;

 

Electrical connection: 
Connection for Pt100 external sensor for temperature measurement and 
control. 

;

 

Model FT402 is provided with a handle for portable use.

 

Model FT902 is equipped with four castors. Two of the castors include 
locking levers that should be pressed down after setting up the unit to 
prevent it from moving. 

;

 

The immersion probe is connected to the instrument with a flexible, specially 
insulated tube. On model FT902 the immersion probe is also flexible and 
may be adjusted precisely to different positions within the vessel. 

 
 
 

2.  Operator responsibility – Safety instructions 

The products of JULABO ensure safe operation when installed, operated, and maintained 
according to common safety regulations. This section explains the potential dangers that may 
arise when operating the circulator and also specifies the most important safety precautions to 
preclude these dangers as far as possible. 

The operator is responsible for the qualification of the personnel operating the units.  

¾

  The personnel operating the units should be regularly instructed about the dangers 

involved with their job activities as well as measures to avert these dangers. 

Summary of Contents for FT402

























Reviews: