Preparations
5.2. Bath fluids
Caution:
No liability for use of other bath fluids!
Do not use flammable bath fluids!
Water:
The quality of water depends on local conditions.
•
Due to the high concentration of lime, hard water is not suitable for
temperature control because it leads to calcification in the bath.
•
Ferrous water can cause corrosion - even on stainless steel.
•
Chloric water can cause pitting corrosion.
•
Distilled and deionized water is unsuitable. Their special properties cause
corrosion in the bath, even in stainless steel.
Recommended bath fluids:
Bath fluid
Temperature range
soft/decalcified water
5 °C to 80 °C
mixture water/glycol, mixture 1:1
-20°C to 50°C
Thermal G
-30°C to 80°C
JULABO Bath liquids
Order No.
Thermal G 10 Liters
8 940 124
Thermal G 5 Liters
8 940 125
See website for list of recommended bath fluids.
Contact:
see page 5
Notice:
Please contact JULABO before using other than recommended bath fluids.
Only use non-acid and non corroding bath fluids.
JULABO takes no responsibility for damages caused by the selection of an
unsuitable bath fluid.
Unsuitable bath fluids are liquids which e.g.
•
are very highly viscous
(much higher than 30 mm
2
/s at the respective working temperature)
•
have corrosive characteristics or
•
tend to cracking.
22
www.
.com
1.800.561.8187
