Operation
60
8 Operation
8.1 Switch on the unit
This section describes how to switch on the device.
The device is connected and ready for operation.
1. Switch the device on at the mains switch.
The software boots and starts the device. The display shows the device
name, voltage version and software version.
The device is switched on. It switches to the most recently activated
operating mode, manual operating mode or remote control mode. If the
auto start function is activated, then the device starts directly into the last
setting.
8.2 Switch off the unit
This section describes how to switch off the device.
The device is switched on.
1. Stop a running temperature control application.
If a cooling machine is connected, the cooling symbol flashes and the
cooling machine is shut down.
Do not switch off the device until the cooling symbol stops flashing and the
device is in standby mode.
2. Switch the device off at the mains switch.
The device is switched off.
8.3 Start temperature control application
A temperature application can be started directly on the unit. Other options
include timer-controlled temperature control application with the integrated
programmer and remote control via a connected PC.
The unit is switched on.
1. Activate the
<Setpoint>
field on the Home screen with the central
controller.
2. Enter the desired setpoint and confirm your input.
Summary of Contents for DYNEO DD
Page 96: ......
