Julabo CORIO CP-310F, Original Operating Manual

Page: 8 / 32

Safety
8
4 Safety
4.1 General Safety Instructions for the operating company
This section outlines the General Safety Instructions that must be observed by
the operator to ensure safe operation.
• The operator is responsible for the qualifications of its operating personnel.
• The operator must ensure that the operating personnel has been instructed
in use of the device.
• The device operators must receive regular training about the dangers
involved in their work and measures to prevent such dangers.
• The operator must ensure that persons entrusted with the operation,
installation and maintenance have read and understood the operating
manual.
• The device may only be configured, installed, maintained and repaired by
trained personnel with appropriate qualifications.
• If hazardous substances or substances that may become hazardous are
used, the device may only be used by personnel who are qualified to handle
these substances and the device.
• The operator must ensure that the device is checked for safety and
functionality at regular and usage-related intervals.
• The operator must ensure that the mains supply has a low impedance to
prevent influencing other devices powered by the same supply.
4.2 General Safety Instructions for the operator
This section outlines the General Safety Instructions that must be observed by
the user to ensure safe operation.
• Read the operating manual before initial operation.
• The device may only be connected to mains power outlets with a protective
earth (PE).
• The mains plug is a safe insulator of the power supply grid and must be
freely accessible at all times.
• The removable power cable is designed for the performance and
temperature of the device and must not be replaced by a weaker rated
power cable.
• Do not start the device if it has a damaged power cable
• Do not operated damaged devices.
• Only mount suitable circulators on the cooling machine.
• When connecting a circulator, observe the respective connection assignment
of the plugs and technical data for the products.
• Observe the safety symbols on the device.