EN
33
TIPS
Follow the following tips for best functionality
and useful life.
• Only vacuum up dry leaves and twigs and
dry garden debris.
• The shredding function does not work very
well with wet material and the risk of
blockage increases.
• Use the blower mode to blow wet leaves
together in one place and allow them to
dry before vacuuming and shredding.
• Avoid vacuuming stones and other hard
objects, this can damage the fan wheel.
• Avoid vacuuming soil. Soil contains
moisture and can together with other
garden debris cause a blockage.
• The product must not be used as a waste
shredder. Do not attempt to vacuum
material other than garden waste.
• For best functionality and comfort the
catcher should be emptied when it is
about half full. This makes the product
easier to use and optimises its
functionality.
MAINTENANCE
NOTE:
• Make sure the product is disconnected
from the mains when cleaning or
servicing.
• Clean the leaf blow after use.
• Dry embedded scraps can be impossible
to remove without dismantling the
motor unit. This sort of cleaning is not
covered by the warranty.
CLEANING
• Do not spray water on the leaf blower or
immerse it water or any other liquid – risk
of electric shock.
• Keep the ventilation openings, motor
unit and handle clean.
• Clean the leaf blower with a brush or
damp cloth. Do not use strong detergents
or solvents, this can damage it.
CLEANING THE IMPELLER
Leaves and green plants can block the leaf
blower in vacuum mode.
1. Switch off the leaf blower, pull out the
plug and wait until all moving parts have
completely stopped.
2. Remove the suction tube from the intake
opening.
3. Carefully remove the material blocking
the impeller.
4. Check that the impeller rotates freely and
is undamaged.
5. A damaged impeller must be replaced at
an authorised service centre or by other
qualified personnel.
6. Replace the suction tube or the guard for
the intake opening.
NOTE:
It is not possible to start the leaf blower
unless the suction tube or guard for the
intake opening are correctly in place.
Summary of Contents for Meec tools 011398
Page 4: ...2 1 3...
Page 5: ...4 5 6 7 8...