EN
31
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Output 2800 W
Speed
12000 rpm / 14500 rpm
Blowing speed
313 km/h
Air flow
630 m³/h
Catcher
45 l
Weight
4.1 kg
Sound pressure
level, LpA
86.3 dB(A), K=2.5 dB
Sound power
level, LwA*
101.4 dB(A), K=2.77 dB
Sound power level, LwA**
103 dB(A)
Vibration level
4.92 m/s², K=1.5 m/s²
*Measured, **Guaranteed
Always wear ear protection.
The declared values for vibration and noise,
which have been measured according to a
standardised test method, can be used to
compare different tools with each other and for
a preliminary assessment of exposure.
The measurement values have been determined
in accordance with EN 50636-2-100:2014.
WARNING!
The actual vibration and noise level when
using tools may differ from the specified
maximum value, depending on how the
tool is used and the material. It is therefore
necessary to determine which safety
precautions are required to protect the user,
based on an estimate of exposure in actual
operating conditions (taking into account all
stages of the work cycle, e.g. the time when
the tool is switched off and when it is idling,
in addition to the start-up time).
DESCRIPTION
1. Suction tube
2. Fan casing
3. Motor casing
4. Catcher
5. Lock knob for suction tube
6. Lock button for suction tube
7. Power switch
8. Blowpipe
FIG. 1
ASSEMBLY
UNPACKING
Unpack the product and check that all the parts
are included and undamaged. Do not use the
product if any parts are missing or damaged –
risk of serious personal injury.
PREPARATIONS
The product is supplied partly assembled.
The blowpipe/suction tube and catcher bag
must be fitted before use.
FITTING THE BLOWPIPE
Fit the two parts of the blowpipe on the
machine body. Make sure the parts lock
together.
FIG. 2
FITTING THE SUCTION TUBE
1. Release the fan casing from the machine
body.
FIG. 3
2. Fit the suction tube on the machine body.
FIG. 4
Summary of Contents for Meec tools 011398
Page 4: ...2 1 3...
Page 5: ...4 5 6 7 8...