EN
35
• Always pay attention when using this
power tool, so that you can detect and
handle risks at an early stage. Prompt
action can prevent serious personal injury
and material damage.
• Switch off the power tool and unplug it
from the power supply in the event of a
fault. Make sure the power tool is checked
by a qualified professional, and if
necessary repaired, before using it again.
OTHER RISKS
Even if you use this power tool in accordance
with all the safety instructions, there is still a
risk of personal injury and other damage. The
following hazards related to the design and
construction of this power tool can occur:
• Effects on health from vibration if the tool
is used for long periods, or is not handled
and maintained correctly.
• Personal injury and material damage as a
result of defective accessories and hitting
hidden objects when using the tool.
• Risk of personal injury and material
damage as a result of ejected objects.
• Damage to lungs (if an effective face mask
is not worn).
• Damage to ears (if effective ear protection
is not worn).
WARNING!
This power tool produces an electromagnetic
field during use. This field can in some
circumstances affect active or passive medical
implants. To reduce the risk of serious or
life-threatening injury, we therefore advise
persons with medical implants to consult
their doctor and the manufacturer of the
implant before using this power tool.
3. Avoid damaging the centre hole.
4. Do not subject grinding discs to heavy
weights; do not put anything on top of
them.
5. Store grinding discs flat, or upright in a
dry and frost-free place.
6. When possible keep grinding discs in
their original packaging, or in special
containers or on special shelves.
VIBRATION AND NOISE
ATTENUATION
To reduce the effects of noise and vibrations
you should limit the time in use, use the
low-vibration and low-noise modes, and
wear personal safety equipment. Observe the
following to minimise the risk of exposure to
vibrations and loud noise:
1. Only use the power tool for the purpose it
was designed for, and in accordance with
these instructions.
2. Make sure that the power tool is in good
condition and well maintained.
3. Use the right accessories for the power
tool and make sure they are in good
condition.
4. Keep a firm grip on the handles/gripping
surface.
5. Maintain the power tool in accordance
with these instructions and make sure it is
well lubricated (where applicable).
6. Plan the work schedule to spread the
use of tools with heavy vibrations over a
longer period.
EMERGENCY MODE
Familiarise yourself with the use of this power
tool with the help of these instructions.
Commit the safety instructions to memory and
follow them to the letter. This will help you to
avoid risks and dangerous situations.
Summary of Contents for Meec tools 004976
Page 4: ...1 2 1 2 3 4 5 6 7 8 9 ...
Page 5: ...3 ...
