Jula Meec TOOLS 002781, Operating Instructions Manual

Page: 39 / 147

EN
38
TROUBLESHOOTING
Problem Possible cause
The plug is plugged into the mains, but the
snowblower will not start. Both safety switches have not been pressed in at
the same time.
The interlock switch is released and both safety
switches are pressed in at the same time, but
the snowblower will not start. The plug is not properly plugged into the mains
socket.
The extension cable is underrated and not
suitable for the snowblower.
The rotor is blocked by lumps of snow or objects.
A fault has occurred on the motor.
Why has the snow clearing capacity diminished? The mains voltage does not match the voltage
required for the snowblower.
The extension cable is undersized.
The rubber pads could be damaged, or the
screws have come loose.
The rubber pads are turned the wrong way round.
The ejector tube is blocked by lumps of snow or
objects.
Abnormal noise can be heard.
What is the reason for this? The rotor is blocked by lumps of snow or objects.
The screws on the rubber pads have come loose.
The rotor has dropped down or is damaged, or
there is a fault on the motor.
Why did the snowblower suddenly stop working? The plug has been pulled out from the mains.
The rotor is broken. The motor is damaged.