EN
31
8�
When the work is finished, put the power switch (23) in the OFF position�
9�
Remove the cleaned components�
10�
Switch off the washer and unplug the power cord from the mains after use and close the lid (1)�
11�
Clean and store the washer indoors out of the reach of children�
REPLACING THE CLEANER
1�
Open the lid to the drain underneath the washer�
2�
Pour out the consumed solvent into a recycling tank�
MAINTENANCE
NOTE: Switch off the pump and unplug the power cord before cleaning and maintenance.
• Clean the washer with a cloth moistened with water and a mild detergent� Some detergents and
solvents can damage plastic and insulated parts�
• The rod on the lid has a thermal fuse that closes the lid in the event of a fire� If the fuse has
tripped it must be replaced with a new one of the same type�
• Clean the pump filter regularly by pulling it off the pump housing and rinsing it with clean wash liquid�
• The level of the liquid in the pan must not drop below the pump inlet, this can damage the pump�
Summary of Contents for HAMRON 619-625
Page 7: ...SE 7 BESKRIVNING ...
Page 14: ...NO 14 BESKRIVELSE ...
