EN
27
Extension cord
• Replace damaged cords immediately�
• Check that the cross-section of the extension cord's conductors is sufficient for
the motor's power supply�
• Always use a larger cross-sectional area if in doubt�
• Check that the mains voltage corresponds to the rated voltage on the type plate�
• Do not expose power tools to rain or moisture� There is a greater risk of electric
shock if water gets into a power tool�
• Never touch live parts – risk of electric shock�
• Only plug the washer into a fused and RCD protected mains outlet�
Maintenance
WARNING:
• Switch off the washer and unplug the power cord from the mains before
cleaning and/or maintenance�
• Do not use flammable cleaners, such as petrol or paraffin�
• Always check that the washer is in good condition before use� Clean, maintain
and repair the washer in accordance with these instructions�
• Switch off and unplug the washer immediately in the event of abnormal noise
or vibrations� Have the washer checked and repaired before using it again�
Repairs should be carried out by qualified personnel�
Summary of Contents for HAMRON 619-625
Page 7: ...SE 7 BESKRIVNING ...
Page 14: ...NO 14 BESKRIVELSE ...