![Jula 920-377 Operating Instructions Manual Download Page 12](http://html1.mh-extra.com/html/jula/920-377/920-377_operating-instructions-manual_2030230012.webp)
ENGLISH
12
DESCRIPTION
1. On/Off/Auto
2.
Setting the time
3.
Setting/switching off the alarm
4. Sleep
function
5. Snooze
button
6. Hour
7. Minutes
8. Volume
knob/buzzer
9.
Band selector (AM/FM)
10. Radio
setting
11. Status
lamp
AUTO
Bottom: Battery compartment for 9V back-up
battery (6F22/6LR61) (not included) for memory.
OPERATION
1.
Plug in the power cord. The appliance must only be connected to a 230 VAC power outlet.
2.
The digits flash.
3.
Set the time by pressing the button to set the time (2) and the hour button (6) at the same time.
Release the buttons just before the correct hour is shown. Press the button to set the time (2) and
the minutes button (6) at the same time to set the correct time.
Radio function
1.
Move the power switch (ON/OFF/AUTO) (1) to ON.
2.
Set the band selector (9) to FM or AM.
3.
Turn the volume knob (8) to the required volume.
4.
Turn the radio knob (10) to the required station.
5. Aerial
The appliance has a sensitive rod aerial with ferrite core for AM reception and a cable aerial for FM
reception. Fully extend the cable aerial for best reception.
Radio alarm
Follow the instructions below to set the radio alarm.
1.
Move the power switch (ON/OFF/AUTO) (1) to AUTO.
2.
Press the alarm setting button (3) down, then press the hour button (6) and then the minutes button
(7) to set the required alarm time. The alarm time is saved in the memory. You can show the set
alarm time by pressing the alarm button (3). The radio will start playing every day at the set time.
Switch off the radio by pressing the alarm button (3).
Buzzer alarm
Set the alarm selector (8) to BUZZER. When the buzzer goes off at the set time, you can switch it off with
the alarm button (3) or switch to radio by moving the power switch (1) to ON.
Falling asleep to the radio
You can set the sleep function so that the radio plays from 1 minute to 1 hour and 59 minutes. Select the
position for radio alarm, press and hold the button for sleep mode (4) and then press the minutes button
(7) to set the required sleep time. You can switch off the radio before the set time has run out by pressing
the snooze button (5).