ENGLISH
20
5.
Assemble the front part of the towing arms with two M8x30 bolts and M8 lock nuts. Secure the
coupling on the towing arm with two M8x50 bolts and two M8 lock nuts. Do not tighten fully yet.
Insert the towing pin in the coupling. Secure it with the spring pin (fig. 4).
Figure 3
Figure 4
6.
Tighten all nuts and bolts.
7.
Fit the wheel axles on the outside of the two small angle brackets with two M8x20 bolts and M8
lock nuts (fig. 5). The ends of the wheel axles must be positioned as illustrated. Tighten the nuts
and bolts fully and then release them a little.
8.
Fit the wheels on the wheel axles with two shoulder bolts and M10 lock nuts (fig. 6). Tighten fully.
Figure 5
Figure 6
9.
Attach the ten tine springs in the square holes in the mounting plate. Use a coach bolt (M8x30)
washer (
8), lock washer (
8) and nut (M8) for each spring tine (fig. 7). Tighten fully.
10.
Insert the wire for the spring adjustment of the tines. Bend the ends of the wire to secure it (fig. 8).
Figure 7
Figure 8
11.
Fit one large angle bracket on the wheel axle using two M8x25 bolts, M8 lock washers and M8
nuts. Do not tighten fully yet. Insert the lifting handle in the mounting plate. Attach it to the angle
bracket with an M8x20 bolt and M8 nut (fig. 9). Tighten fully.
