ENGLISH
14
ENGLISH
SAFETY INSTRUCTIONS
Read these instructions carefully before use!
Install the floodlight in accordance with current national and local laws and regulations for electrical
systems. If in doubt, contact your dealer.
Do not modify the floodlight. Modifications will void the warranty and the floodlight will no longer be
safe to use.
The floodlight must not be used with a dimmer.
The light must be connected to earth.
The light gets hot when used. It must therefore be switched off and allowed to cool before touching.
Never try to remove the lens cover as this will damage the unit and void the warranty.
ELECTRICAL SAFETY
New installations and extensions to existing systems must always be performed by a qualified electrician.
If you have the necessary experience and knowledge, you may replace switches and wall sockets, fit
plugs, extension cords and lamp holders. If not, you should contact an electrician. Improper installation
may result in electric shock or fire.
TECHNICAL DATA
Mains voltage
220-240 V AC/50 Hz
Max output
500 W linear and
150 W depending on model
Bracket
The bracket can be removed and turned
180 degrees to mount the light either
vertically or horizontally.
Minimum distance to illuminated
object 1
metre
Lighting time
5 s – 5 min
The bracket can be removed and turned 180 degrees to mount the light either vertically or horizontally.
Minimum distance to illuminated object: 1 metre.
INSTALLATION
PIR detector function
All objects emit heat in the form of invisible infrared radiation. Different objects emit this radiation at
different wavelengths. The PIR sensor detects IR radiation when an object moves within the detection
area, which radiates like fingers from the lens.
Detection area
The diagram, see figure, illustrates the PIR
sensor’s detection area (180 degree detection
angle). The sensor should be mounted 2.5 metres
above the ground and at an angle of 12.5 degrees
to the ground for optimal detection. The detection
area can be set with the SENS knob. The nominal
maximum detection range for the sensor is 12
metres. Reliable detection at this distance cannot,
however, be guaranteed.