ENGLISH
8
ENGLISH
SAFETY INSTRUCTIONS
Read the Operating Instructions carefully before use
The lamp must be connected to an earthed mains supply.
•
Do not use the lamp if the power cord and/or plug are damaged in any way For safety reasons, the
power cord must only be replaced or repaired by an authorised service centre. Consult your dealer.
•
Do not touch the lamp when it is on, or just after switching it off. It can get very hot.
•
Make sure the lamp is not connected to the mains when replacing the fluorescent tube.
•
Do not replace the fluorescent tube until it has cooled.
•
Make sure that the new tube has the same wattage as the old one.
•
Replace the cover immediately if it is damaged. Do not use a damaged lamp.
•
Keep the lamp out of the reach of children.
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Output 55
W
Safety class
I
Protection rating
IP44
Socket GR10Q
Dimensions
285 x 285 x 90 mm
MAINTENANCE
Replace fluorescent tube
1.
Switch off the lamp and make sure that it is not connected to the mains supply.
2.
Open the lamp cover carefully with a screwdriver.
3. Remove
the
cover.
4.
Replace the damaged fluorescent tube with one with the same wattage.
5.
Replace the lamp cover.