background image

ENGLISH 

 

ENGLI SH  

SAFETY INSTRUCTIONS

 

Read these instructions carefully before use

 

 

Always  disconnect  from  the  mains  supply  and  allow  the  bulbs  to  cool  for  10  minutes  before 
touching the light. The light emits a lot of heat when it is switched on. 

NOTE! 

 

If you are unsure about the installation, or experience problems, contact an authorised electrician. 

 

The light must be connected to the mains with a plug fused for 10 Amps, unless otherwise stated. 
Always be careful when handling halogen bulbs. Do not touch the naked bulb. 

 

Before starting installation, check that the mains power supply is disconnected. Do not connect the 
light to the same mains supply that powers fluorescent tubes, since the internal transformer for the 
light can be damaged by inductive voltage spikes. 

 

Read the Operating Instructions carefully and keep them in a safe place for future reference. 

 

Minimum of 0.5 m to flammable material in front of the bulbs. 

TECHNICAL DATA

 

Halogen bulbs 20W G4 (included) 12V 

INSTALLATION

 

1. 

Choose a suitable place to fit the light. 

2. 

The  power  cord  has  a  plug  for  simple  connection  to  a  power  outlet.  No  other  wiring  is  therefore 
necessary, which avoids cluttering the interior. 

3. 

Several lights can be connected in series by using the supplied connector. A maximum of 10 lights 
can be connected together. 

4. 

Always  disconnect  from  the  mains  supply  before  carrying  out  any  maintenance  on  the  light  or 
replacing bulbs. 

Dimmer 

The  light can  be  connected  to  a  dimmer.  Note  that  the  dimmer must  be  able  to  withstand  an  electronic 
transformer in order to dim this light. 

MAINTENANCE 

Replacing bulbs 

1. 

Disconnect the mains supply. 

2. 

Remove the glass cover. 

3. 

Remove the old halogen bulb. 

4. 

Replace  with  a  similar  halogen  bulb.  Use  a  clean,  lint  free  cloth.  Do  not  touch  the  halogen  bulb: 
This will shorten its life! 

Cleaning 

Clean  the  bulbs  with  a  soft,  lint  free  cloth  when  necessary.  Do  not  touch  them  with  your  bare  hands. 
Clean the light in the same way. 

Subject to printing  errors and design changes over  which  we have no control. In the event of problems, 
please contact our service department.   
www.jula.com 

 

Reviews: