ENGLISH
8
ENGLISH
SAFETY INSTRUCTIONS
Read these instructions carefully before use!
The floodlight may be used outdoors if used as directed.
The light gets very hot when it is switched on. Do not touch it until it has cooled.
The floodlight must not be placed near flammable material.
Make sure there is adequate ventilation.
The floodlight must be connected to earth.
Use a residual current device.
Make sure there are no sharp objects near the power cord.
Inspect the light and power cord for damage before use.
DESCRIPTION
1.
Screw, protective glass
2. Cross
bar
3. Mounting
screw
4. Switchbox
5. Lock
ring
6.
Cable strain relief
7.
Lock, stand leg
TECHNICAL DATA
Mains voltage
230 V ~ 50 Hz
Output
2 x MAX 500 W
Protection rating
IP44
Halogen tube
2 x 500 W 118 mm R7s
Power cord
H05RN-F 3G1.0 mm²
Max. height
2,1 metres
Protective glass
177 x 140 x 5 mm
INSTALLATION
The stand is supplied ready assembled. It must be raised so that the light can be fitted onto it.
Push the stand lock (7) up and unfold the stand leg. Release the lock. Lock the leg in the stop
position. Do the same with the other legs.
Turn the lock rings (5) anti-clockwise to adjust the stand height. Pull out the stand to the height
required and turn the lock rings clockwise.
