ENGLISH
9
ASSEMBLY
1.
Attach the brace (6) to the wheel axle (7) using bolt (13), lock washer (14), nut (15) and washer
(18).
2.
Attach the handle mount bar (4) onto the axle (7) using bolts (9), nuts (11) and lock washers (10).
3.
Assemble the brace (6), handle mount bar (4), handle (12) and V support (5) together using bolts
(9), nuts (11) and lock washers (10).
4.
Install the ball coupler (1) onto the axle (7) using bolt (2) and lock washer (3).
5.
Assemble the wheels (8) on the axle using the large washers (17) and cotter pins (16).
6.
Make sure that all nuts and bolts are tightened fully.
Subject to printing errors and design changes over which we have no control. In the event of problems,
please contact our service department.
www.jula.com