Jula 242-110, Operating Instructions Manual, Page: 33 / 36

ENGLISH
33
CUTTING WITH TABLE AT 90
O
AND BLADE AT 0-45
O
1. Adjust the turntable (8) to 90

and lock with the lock handle (10).
2. Release the lock lever (13) and hold the handle firmly in position (2). Angle the blade until the
actual angle is shown on the scale (15).
3. Lock the lock lever (13).
4. Saw as in the previous description.
PRECISION ADJUSTMENT OF STOP FOR SAWING AS ABOVE
1. Lock the blade in its lower position with the holding pin (16).
2. Fix the table to 0
o
.
3. Release the lock lever (13) and hold the handle firmly in position (2). Angle the blade until a 45
o
angle is shown on the scale (15).
4. Release the check nut and adjust the screw (22) until the angle between the blade and table is 45
o
.