ENGLISH
19
Figure 1 Standard accessories
Figure 2 Extra accessories
ASSEMBLY
The saw bench is almost ready-assembled on delivery. All you need to do is install the handle and the
material support rails as follows:
1.
First set the saw bench up by pressing the leg's lock buttons and folding out the legs, see figure 3.
2.
The mounting arms are installed on the bed by moving the lock handle upwards and tensioning the
arms above the bed. First hook the rear section into place, then lower the front section and release
the locking handle, see figures 4, 5 and 6.
Figure 3
Figure 4
Figure 5
Figure 6
3.
Adjust the two material support rails for height using the lock knobs, see figures 7 and 8.