– 6 –
4. Wiring (inside the electrical equipment rack)
3) Pull AT solenoid cable
②
into the electrical
equipment rack through cable entrance of the
rack.
Cable entrance
1) Connect AT solenoid cable
②
and AT SOL cable asm. A
⑦
to the AT SOL PCB asm.
⑥
in the elec-
trical equipment rack.
[Standard type and the laser type]
⑥
⑥
②
②
⑥
⑥
⑦
⑦
GND
LOOSE
24V
2) Insert the pin contact of the black wire (GND) of AT SOL cable asm. A
⑦
into IN6/IN7 connector pin
No. 4.
3) Connect AT SOL cable asm. A connector
⑦
to the loose line / LOOSE connector of the electrical
control box.
Pin No. 4
Loose thread
IN6/IN7
