– 8 –
5. Method for adjusting the AT
1) Press button
A
.
5-1. Setting of the parameters
2) Press button
B
.
In the default state, the password that has
been factory-prepared at the time of delivery is
provided.
The factory-provided password is "11111111".
3) Press button
C
.
A
B
C
E
D F
4) When you want to enable the AT function,
change the setting of
D
from "Tension disk
release" to "Thread clamp".
In the case of the sewing machine for light-
weight materials, set correction value
F
to
"-10". After you have set the correction value,
press button
E
.
