2
4安装机头（图2) Installing the machine head (Fig.2)
-
1．插入膝控提升顶杆0。
1.lnsert the knee lifter lifting bar CD.
2将两个机壳绞链O插入机头平板的两孔忱它
2.lnsert the two hinges@ into the holes in the
machine bed.
3．将机头上的较链勾住台板上的较链套＠
平稳地将机头放入台板的框孔＠中。
3.Clamp the two hinges onto the rubber
cushions@ in the work table, and the place the
machine head onto the head cushions© which
are on the top of the oil pan corne
「
s.
4将机头撑杆O插入孔中。
4.Tap the rest bar@ into the table hole.
。
O
屯歹
3
注意：确保机头撑杆插入孔中。
如撑杆未插到最低位置， 放入机头时，
机头将发生倾倒， 这样比较危险。
NOTE: Tap the rest bar securely into the table
hole, if not, the machine head will not be safe
when it is tilted back.
3
5安装膝控装置（图3) lnstalllng the knee lifter assy, (Fig.J)
将膝控碰块O， 弯杆及接头插入较链轴＠中，
稍微拧紧螺钉0
。
Insert the knee lifter assy. (I) into the shaft®
under the oil pan, and slightly tight the screw@
-2-
