JUKI MO-6800DD10 Series, Instruction Manual

Page: 32 / 47

– 30 –
No Item Description Range Initial value
P31 Number of stitches for
keeping the intermittent
suction in the operating
state for pedal control suc -
tion 1
In the case "6" is selected for "P17", the suction 1 is
kept in the operating state for the number of stitches set
for this function setting number "P31" during sewing.
The suction 1 carries out operation and non-operation
of suction alternately in repetition.
0-200 50
P32 Number of stitches for
keeping the intermittent
suction in the stopped state
for pedal control suction 1
In the case "6" is selected for "P17", the suction 1 is
kept in the stopped state for the number of stitches set
for this function setting number "P32". The suction 1
carries out operation and non-operation of suction alter -
nately in repetition.
In the case this function setting number is set to "0", the
sewing machine will carry out the same operation as it
carries out when the function setting number "P17" is
set to "4: Long suction" regardless of the set value of
the function setting number "P31".
0-200 50
P33 Number of stitches for
keeping the intermittent
suction in the operating
state for pedal control suc -
tion 2
In the case "6" is selected for "P22", the suction 2 is
kept in the operating state for the number of stitches set
for this function setting number "P33" during sewing.
The suction 2 carries out operation and non-operation
of suction alternately in repetition.
0-200 50
P34 Number of stitches for
keeping the intermittent
suction in the stopped state
for pedal control suction 2
In the case "6" is selected for "P22", the suction 2 is
kept in the stopped state for the number of stitches
set for this function setting number "34". The suction 2
carries out operation and non-operation of suction alter -
nately in repetition.
In the case this function setting number is set to "0", the
sewing machine will carry out the same operation as it
carries out when the function setting number "P22" is
set to "4: Long suction" regardless of the set value of
the function setting number "P33".
0-200 50
P35 Number of pieces This function setting number is used for counting the
number of pieces produced.
0-9999 0
P36 Number of times of thread
trimming for sewing one
piece of product
This function setting number is used for setting the num -
ber of times of thread trimming to be carried out before
adding one to the current number of counts of "P35".
1-50 10
P40 N1-N2 N1: Electrical box software version;
N2: Operation panel software version