– 25 –
6-1. Operation panel
❶
❷
❺
❻
No.
How to press
the button
Function
❶
Short time
This button is used for changing over the current mode to the function setting
mode.
❷
Short time
This button is used for confirming the settings you have changed.
❸
Short time
This button is used for increasing the current numerical value on the function
setting screen.
Long time
Continuous input is enabled
❹
Short time
This button is used for decreasing the current numerical value on the function
setting screen.
Long time
Continuous input is enabled
❺
Short time
This button is used for changing over the position of the needle bar between the
upper and lower positions when the sewing machine stops.
Dot B lights up: The needle bar stops at its upper position; Dot B goes out: The
needle bar stops at its lower position.
Long time
Keeping this button held pressed changes over the enable / disable of the soft-
start function.
Dot C lights up: Enabled / goes out: Disabled
❻
Short time
This button is used for changing the brightness of the hand illumination LED.
Refer to
.
Long time
Keeping this button held pressed changes over the color of the hand illumination
LED between the incandescent light color and the light bulb color.
.
A
This LED repeats ON and OFF in sequence to indicate that the sewing machine
is in operation.
❹
6. OPERATION PROCEDURE
❸
B
C
A
Summary of Contents for MO-6800DD10 Series
