Operation and function
Presser foot lifter
(To raise the presser foot by the presser foot
lifter)
A : For regular sewing operation (sewing a medium-weight materi-
al), raise the presser foot to position (A) illustrated in the figure.
B : When you sew a heavy-weight material, raise the presser foot
to position (B) illustrated in the figure, to provide more space
between presser foot and throat plate.
Changing the presser foot
Switch the machine off (power switch”O”)
WARNING :
When using the extra lift (B), do not run the machine or turn
the handwheel.
1. Raise the presser foot.
2. Turn the handwheel until the needle is fully raised.
3. Press point (C) ilustrated in the figure, and the presser foot
will be released.
4. To release the presser foot, raise the presser foot lifting lever
to its highest position (B). Then you can release the presser
foot easily.
5. To attach the presser foot, place it so that the presser foot
pin (D) comes exactly under the groove in the holder. Lower
the presser foot lifting lever and the presser foot will engage
automatically.
A
C
D
B
Caution
Zur Beachtung
Attention
Precaucion
7
C
D
8
A
B
1. Turn the handwheel until the upper knife is fully raised. Open
the looper cover.
2. Press the part indicated as (A) in the figure toward the right
until it will go no further.
3. Keep pressing (A) and turn the knob on the right side in the
direction of the arrow.
4. Turn the knob until the knife reaches position (B), and snaps
into locked position.
Releasing the upper knife
Switch the machine off (power switch”O”)
11
