– 22 –
– 22 –
‒ 22 ‒
To adjust the height of the presser foot, adjust the height
of screw
❶
so that the presser foot does not come in con
-
tact with other components and fix the presser foot with
nut
❷
.
15. Adjusting the presser foot lift
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the follow-
ing work after turning the power off and ascertaining that the motor is at rest.
When the micro-lifter collar
❶
is turned clockwise and
counterclockwise, the presser bar lifting lever is pressed
down to lift the presser foot.
Adjust the height of the micro-lifter according to the sew
-
ing condition.
In the case the micro-lifter is not used, use
the sewing machine with the marker line on
the micro-lifter collar faced straight up.
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the follow-
ing work after turning the power off and ascertaining that the motor is at rest.
❶
❷
❶
16. Adjusting the micro-lifter
