– 1 –
BEFORE OPERATION
CAUTION :
Check the following so as to prevent maloperation of and damage to the machine.
• Before you put the machine into operation for the
fi
rst time after the set-up, clean it thoroughly .
Remove all dust gathering during transportation and oil it well.
• Con
fi
rm that voltage has been correctly set.
Con
fi
rm that the power plug has been properly connected to the power supply.
• Never use the machine in the state where the voltage type is different from the designated one.
• The direction of normal rotation of the machine is counterclockwise as observed from the pulley side.
Take care not to allow the machine to rotate in the reverse direction.
• When tilting the machine head, tilt it after removing knee lifter hook.
• Never operate the machine unless the machine head and the oil tank have been
fi
lled with oil.
• For a test run, remove the bobbin and the needle thread.
• For the
fi
rst month, decrease the sewing speed and run the sewing machine at a speed of 1,500 sti/min or
less.
• Operate the handwheel after the machine has totally stopped.
1. INSTALLATION OF THE MACHINE
SPECIFICATIONS
1. Carry the sewing machine with two persons.
(Caution) Do not hold the handwheel.
2. Do not put protruding articles such as the screwdriver and the like at
the location where the sewing machine is placed.
3. Attaching the hinge washer and rubber cushion
Fix the rubber hinge washer, the head support rubber supplied with
the machine on the table using the nails.
Noise
- Equivalent continuous emission sound pressure level (L
pA
) at the workstation:
A-weighted value of 77.0 dB; (Includes K
pA
= 2.5 dB); according to ISO 10821- C.6.2 -ISO 11204 GR2 at 2,000
sti/min.
sti/min
– 6 –
11. THREADING THE MACHINE
10. SETTING THE BOBBIN CASE IN THE HOOK AND TAKING IT OUT FROM
THE HOOK
WARNING :
To avoid possible personal injury due to abrupt start of the machine, turn off the power to the machine and check to be sure that the
motor has totally stopped rotating in prior.
WARNING :
To avoid possible personal injury due to abrupt start of the machine, turn off the power to the machine and check to be sure that the
motor has totally stopped rotating in prior.
