− −
(1) Installing the air control unit
1) Install regulator (asm.)
1
on the bottom surface
of the table with wood screw
2
supplied as
accessories.
2) Install air control unit (asm.)
3
on the bottom
surface of the table in four places with wood
screws
4
supplied as accessories.
4
2
3
1
7. INSTALLING THE AIR DRIVE UNIT
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
3) Install regulator (asm.)
1
and air control unit
(asm.)
3
in the broken line frame as shown in
the illustration on the left side. Determine the
installing position where it is convenient to the
user.
Rear view of table
6. INSTALLING THE KNEE SWITCH
1) Attach supporting base
2
of knee switch
1
onto
the underside of the table using wooden screws
3
.
2) Fix cord
4
to an appropriate position on the table
using a staple supplied with the machine so as to
prevent the cord from hindering the operation.
4
2
3
1
