− 2 −
Oil pan
8
5
6
6
9
3
2
4
7
5) Attach drain plug
2
, oil seal
3
and washer
4
to
the oil pan. Attach packing
6
and washer
9
to
screw
5
and fix them with nut
7
.
6) After they are fixed, screw in waste oil container
8
into drain plug
2
.
7) Insert hinge
!0
into the bed hole, engage the
hinge with the rubber hinge of the table, and put
down the machine head onto the head support
rubber at four corners.
8) Install head support bar
!1
firmly on the table by
inserting it into the table hole until it will go any
further.
3. ADJUSTING THE BELT TENSION
Adjust the belt tension with the height of the motor so
that the belt sags 5 mm when the center of V belt is
applied with a 9.8N load.
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
Handwheel
Motor pulley
9.8N
15mm
4) Fix oil pan
1
supplied with the machine on the
table in 8 places with wood screws.
Table
Align
1
50 mm
20 mm
Operator’s side
Align
!1
!0
!0
