– 7 –
Data edit screen
) Press key
1
for three seconds.
Communication screen 1
2) Press key
2
.
Data selection screen
3) Press key
3
.
4) Press key
4
.
d
d
d
2
4
3
*
. RE-SETUP OF SERVO PROGRAM
Perform the work by the procedure below when rewriting the servo program in the same way of
"
&
. RE-
SETUP OF MAIN PROGRAM"
.
1. When main program matches with servo program
Perform the work by the procedure below when making the servo program version-up by using the media
card.
) First, turn ON the power. Normally, the sewing ready screen is displayed.
2) Insert the media card into the operation panel.
3) Perform operation by the procedure displayed in the screen below.
1
