JUKI DLU-5494N-7/IP-110C, Installation Manual, Page: 9 / 10

­–­7­– ­–­7­– ­–­7­–
■ Program selection screen Main shaft
When­the­screen­has­changed­to­the­aforementioned­program­selection­screen,­press­switch­
1
­and­select­
the program. The machine type code and RVL of the selected program are displayed on the screen. Confirm
that­the­machine­type­code­and­RVL­of­the­program­you­desire­to­write­are­displayed­and­press­switch­
2
­to­
start­writing.
The­screen­above­is­the­example­that­the­program­of­the­machine­type­code­"SC-90A"­and­RVL­
"0-0-02-00"­has­been­selected.
Press­switch­
1
in the data classification selection pop-up to select the rewriting of software of main shaft.
Then­press­switch­
2
­to­execute­reading.
■ During reading data screen
It­is­the­state­that­the­program­is­read­from­CompactFlash(TM).­Do­not­perform­the­panel­operation.
■ Data classification selection pop-up
3) Rewriting procedure of the software of main shaft
1
2
2 1