JUKI DLU-5494N-7/IP-110C, Installation Manual, Page: 8 / 10

–­6­– –­6­– –­6­–
■
Writing finish screen IP-110
When the screen has changed to the aforementioned screen, writing is finished. Turn OFF the power. When
rewriting­the­software­of­main­shaft,­start­from­
"3. (2) 1) Common procedure"
.
When­the­screen­has­changed­to­the­aforementioned­program­selection­screen,­press­switch­
1
­and­select­
the program. The machine type code and RVL of the selected program are displayed on the screen. Confirm
that­the­machine­type­code­and­RVL­of­the­program­you­desire­to­write­are­displayed­and­press­switch­
2
­to­
start­writing.
The­screen­above­is­the­example­that­the­program­of­the­machine­type­code­"IP-00-SC"­and­RVL­
"0-0-02-00"­has­been­selected.
■ During writing screen IP-110
The­aforementioned­screen­is­the­during­writing­screen.­During­displaying­the­during­writing­screen,­do­not­
turn­OFF­the­power.­When­the­power­is­turned­OFF­during­writing,­the­operation­cannot­be­guaranteed.
■ Program selection screen IP-110
2 1
The machine type of the panel display when rewriting the program of IP-110 is IP-100. So, be careful.