– 7 –
– 7 –
– 7 –
The aforementioned screen is the during writing screen. During displaying the during writing screen, do not turn
OFF the power. When the power is turned OFF during writing, the operation cannot be guaranteed.
■
During writing screen Main shaft
■
Writing finish screen Main shaft
When the screen has changed to the aforementioned screen, writing is finished. Turn OFF the power.
Now, the software setup operation is finished.
■
Program selection screen Main shaft
When the screen has changed to the aforementioned program selection screen, press switch
1
and repeat the
selection operation until the programs of "SC-910A" and "01-04-0100" are selected. When the programs are
displayed from the beginning, it is not necessary to perform the selection operation.
When the preparation is ready, press switch
2
to start writing.
Press switch
1
in the data classification selection pop-up to select the rewriting of software of main shaft. Then
press switch
2
to execute reading.
■
During reading data screen
2
1
State that the program is read from the smart media. Do not perform the panel operation.
Contents
