– 5 –
The common procedure is up to here. Then read the description below following the object to be rewritten.
Rewriting the software of IP-100 : refer to
"3. (2) 2) Rewriting procedure of the software of IP-100"
.
Rewriting of the software of main shaft : refer to
"3. (2) 3) Rewriting procedure of the software of main shaft"
.
2) Rewriting procedure of the software of IP-100
■
Data classification selection pop-up
Press switch
1
in the data classification selection pop-up to select the rewriting of the software of IP-100. Then
press switch
2
to execute reading.
■
During reading data screen
■
Data classification selection pop-up
1
2
State that the program is read from the smart media. Do not perform the panel operation.
