JUKI AMS-224EN4530R Page 58 Instruction Manual Download

Page: 58 / 116

– 54 –

(2) Creating procedure of the combination data

E
D

①

Display the data input screen.

Only in case of the data input screen (pink) it is possible to input

the combination data. In case of the sewing screen (green),
press READY key

to display the data input screen (pink).

Pattern No. has not been registered in the initial state, and the

first pattern selection button is displayed in the blank state.

②

Display the pattern No. selection screen.

When PATTERN SELECTION button

is pressed, the

pattern No. selection screen is displayed.

④

Determine the pattern No.

When ENTER button

is pressed, the pattern No. se-

lection screen is closed and the selection is finished.

⑤

Repeat steps

②

through

④

as many as the number of pat-

tern Nos. you desire to register.

When the first register is determined, the second pattern selec

tion button

is displayed.

Repeat steps

②

through

④

as many as the number of pattern

Nos. you desire to register.

When UP or DOWN SCROLL button

is pressed,

the PATTERN NO. button can be selected. The selected PAT-

TERN NO. button is displayed in pink

When the PATTERN NO. INSERT button

is pressed,

a step is inserted before the pattern No. being selected (dis-
played in pink). When PATTERN NO. button

being dis-

played is pressed to select a different pattern No., the pattern
No. is changed over.

If the programmed combination data extends over two or

more screens, the next screen can be displayed by means of

SCREEN SCROLL button

Check to be sure that the selected-mode changeover
button

is set to the pattern registration mode.

If the mode is not the pattern registration mode, press
the selected-mode changeover button

③

Select the pattern No.

When UP/DOWN SCROLL button

is pressed,

pattern No. buttons

which have been registered are

changed over in order.

It is also possible to display the pattern No. input screen by
means of NUMBER INPUT button

and input a pattern

No. directly. The contents of pattern data are displayed in the
buttons. Here, press the pattern No. buttons you desire to select.

Summary of Contents for AMS-224EN4530R





















































































































Search results

Summary of Contents for AMS-224EN4530R

Reviews:

Related manuals for AMS-224EN4530R

Brands by name

Popular brands

JUKI AMS-224EN4530R, Instruction Manual

Search results

Summary of Contents for AMS-224EN4530R

Reviews:

Related manuals for AMS-224EN4530R

Brands by name

Popular brands