– 11 –
1. PREFACE
The operation panel for the AMS-224EN4530R comes in the following one types.
1) Kind of sewing data handled with IP-420
Sewing data that each panel handles are as shown below.
Pattern name
Users' pattern
Vector format data
M3 data
Sewing standard
format
Description
Pattern that can be stored in the body.
Max. 999 patterns can be registered.
File that extension is ".VDT"
Read from media. Max. 999 patterns can be used.
Pattern data of AMS-210D series
Used by copying from floppy disk of AMS-210D series to media.
Max. 999 patterns can be used.
File that extension is ".DAT"
Read from media. Max. 999 patterns can be used.
2) Using the data (M3 data) of AMS-210D series with AMS-224EN
There are two ways to use M3 data with AMS-224EN.
①
Reading by using IP-420
Use PC (personal computer) and copy file (¥AMS¥AMS00xxx.M3) of M3 from floppy disk of AMS-
210D to ¥AMS of media. Insert the media to IP-420, and select Pattern No.xxx from M3 data.
②
Changing to vector format data using PM-1
Change to the vector format data with PM-1. (For the details, refer to Help of PM-1.)
Copy the changed vector format data to ¥VDATA folder of the media.
Insert the media to IP-420 and select Pattern No.
II. OPERATION SECTION (WITH REGARD TO THE PANEL)
Kind
Area
H Type
4530
ø 60 Pitch 3.0mm
Pattern No. 106
