manualshive.com logo in svg

JUKI AMS-224EN/IP-420, Instruction Manual, Page: 19 / 120

Share
Download
JUKI AMS-224EN/IP-420 Instruction Manual Download Page 19

– 5 –

1. PrEFacE

The meda suppled wth the unt contans the followng servce patterns.

The operaton panel for the AMS-224EN comes n the followng three types.

1)   Kind of sewing data handled with IP-420 

 

Sewng data that each panel handles are as shown below.

 

Pattern name

Users' pattern

Vector format data

M3 data

Sewng standard 
format

 

Description

Pattern that can be stored n the body.
Max. 999 patterns can be regstered.
Fle that extenson s ".VDT"
Read from meda. Max. 999 patterns can be used.
Pattern data of AMS-20D seres

Used by copying from floppy disk of AMS-210D series to media. 

Max. 999 patterns can be used.
Fle that extenson s ".DAT"
Read from meda. Max. 999 patterns can be used.

2)   using the data (M3 data) of aMS-210D series with aMS-224EN

 

There are two ways to use M3 data wth AMS-224EN.

1

 

reading by using IP-420

 

Use PC (personal computer) and copy file (¥AMS¥AMS00xxx.M3) of M3 from floppy disk of AMS-

210D to ¥AMS of media. Insert the media to IP-420, and select Pattern No.xxx from M3 data.

2

 

changing to vector format data using PM-1

 

Change to the vector format data wth PM-. (For the detals, refer to Help of PM-.) 

 

Copy the changed vector format data to ¥VDATA folder of the media.

 

Insert the meda to IP-420 and select Pattern No.

ø 60  Ptch 3.6mm

Pattern No. 0

 

H Type, G Type 

(Vnyl leather)

H Type, G Type 

 (Denm)

H Type, G Type 

ø 60  Ptch 3 mm

Pattern No. 02

 

ø 60  Ptch 2.5 mm

Pattern No. 03

 

Area

Knd

4530
6030

@

. oPEratIoN SEctIoN (WItH rEGarD to tHE PaNEL)

Summary of Contents for AMS-224EN/IP-420

























































































































Reviews:

No comments