JUKI AMB-289/IP-420, Instruction Manual, Page: 8 / 33

Ⅰ–5
(1) Set-up of the table
2. INSTALLATION
DANGER :
To prevent possible accidents caused by the fall of the sewing machine, perform the work by two
persons or more when the machine is moved.
1) Fix control box
2
, power switch
3
, auxiliary table
!3
and start switch
4
to table
1
.
Note) Install auxiliary table .
!3
. before installing start switch
4
.
2) Fix the cables of power switch
3
and start switch
4
with staples.
3) Pass arm stay fixing screws
!1
(3 pcs.) through arm stay
5
, instal on the table, and fix them with
nuts
!2
.
4) Drive pins
6
to the table, and insert rubber cushions
7
.
5) Fix head support bar
8
on table
1
.
6) Connect the pedal (left-hand side) and control box pedal sensor
!0
with connecting rod
9
.
supplied as accessories.
Adjust the positions of the pedals so that connecting rods
9
and control box
2
do not come in
contact with each other.
1
2
5
4
3
6
7
8
!1
!0
9
9
!2
!3