JUKI AMB-289/IP-420, Instruction Manual, Page: 11 / 33

Ⅰ–8
When tilting the sewing machine head, tilt quietly
the sewing machine until head support bar
1
comes in contact with it.
1. Make sure that sewing machine
head support bar
1
is placed on
the table before tilting the sewing
machine.
2. To protect fall-down, be sure to
tilt the sewing machine in a level
place.
3. Keep the table in the state that
anything is not put on the top
surface of table
Adjust the sewing machine head to the hole of
arm stay, and insert shaft
1
. Fix shaft
1
with
screws
2
in the state that the end faces of shaft
1
are protruded on the both sides.
Be careful that wiring and air pipe
coming out from the bottom face of
the sewing machine are not crushed.
(4) Installing the sewing machine main unit
(5) Tilting the sewing machine head
DANGER :
When tilting/raising the sewing machine head, perform the work so as not to allow your fingers to
be caught in the machine. In addition, to avoid possible accidents caused by abrupt start of the
machine, turn OFF the power to the machine before starting the work.
2
1
1
WARNING :
To prevent possible accidents caused by the fall of the sewing machine, perform the work by two
persons or more when the machine is moved.