– 6 –
When installing the auto-lifter device (AK), the function
of auto-lifter is actuated.
1) Pressing switch
❶
in the control box, turn ON the
power switch.
2) LED displays
❷
and
❸
are turned to (FL ON S)
with "beep", and the function of auto-lifter becomes
effective.
In this state, every time switch
❶
is pressed, the
display is changed over between FL ON S and FL
ON A.
When the display is FL ON A, be sure to change it
over to FL ON S.
3) Turn OFF the power switch, and re-turn ON the
power switch.
The machine returns to the normal operation.
4) When repeating the operations of 1) through 3), the
LED displays become "FL OFF", and the function of
auto-lifter is not actuated.
FL ON S : Auto-lifter device becomes effective.
FL ON A : At the time of using the pneumatic type
auto-lifter, the auto-lifter device becomes
effective.
FL OFF : The function of auto-lifter is not actuated.
(Standard delivery state)
(Similarly, the presser foot is not
automatically lifted when programmed
stitching is completed.)
❸
❶
❷
In case of CP-180
❹
❻
❺
In case of CP-18
(Caution) 1. To perform re-turning ON of the power, be sure to perform after the time of one second or
more has passed.
(If ON/OFF operation of the power is performed quickly, setting may be not changed over well.)
2. Auto-lifter is not actuated unless this function is properly selected.
3. When "FL ON S" is selected without installing the auto-lifter device, starting is momentarily
delayed at the start of sewing. (In addition, be sure to select "FL OFF" when the auto-lifter is
not installed since the touch-back switch may not work.)
