3.Removal of the work clamp kit
4. Mount the button attached device on the feed bracket
1) Put the button attached device
❹
in the feed
bracket
❶
, attach two lifting levers
❸
, tighten two
collar
⓭
and four screws
❺
, and then apply two
springs
❷
1) Secure the feed bracket
❶
, remove the two
springs
❷
, loosen the four screws
❺
, remove the
two lifting levers
❸
, and remove the two working
feet
❹
.
❶
❷
❸
❹
❺
❷
❸
❶
❺
❹
❽
❼
❻
❾
⓫
⓬
A
B
❿
○
CAUTION: When the device
❹
cannot be
smoothly inserted into the feed bracket
❶
remove the spring
❻
, remove the set screw
❼
and
two screws
❽
, and remove the lever assembly
❿
without removing the screw
❾
.
Then, loosen the two screws
⓫
and the two
screws
⓬
, place the device
❹
in the feed
bracket
❶
, and tighten the two screws
⓫
and the
two screws
⓬
so that the A and B sides are in the
same plane.
Then, attach a lever assembly
❿
with two
screws
❽
and a set screw
❼
, and then apply a
spring
❻
.
6Page
