background image

22

ATTENTION!

A warranty card is an integral part of the equipment and should always accompany the product.

This warranty is a legal obligation of the seller and the service centre to undertake the responsibility to rectify defects caused by 

the manufacturer free of charge during the warranty period. All warranty claims should include: model number of the unit, the 

serial number of the cabinet, proof of purchase with the date of sale and clear seller`s stamp.

Warranty claims can be denied in these cases:

– information about the equipment in the warranty card is not full or differs from the information, indicated on the equipment, buyer`s sign is 

absent;

– wrong installation, transportation, improper use and maintenance service of a compressor by buyer (please see Instruction Manual);

– improper usage or installation or failure to clean and/or maintain the product as outlined in the Instruction Manual;

– any mechanical damages which could lead to improper operation or equipment failure;

– violation of instructions recommendations during the operation of equipment or because of wrong user actions;

– if there has been any disaster or in other standard insurance cases, which led to an inability to use the equipment (flood, fire, accident etc.) and 

in any other circumstances, which are not under seller`s or manufacturer`s control;

– in cases of detecting any signs of liquids, insects or other similar problems which led to the problem of normal operation;

– non-qualified repair or any constructive changes of the system by unauthorized persons;

– there is no warranty responsibility for the repair or replacement of failed or damaged components resulting from the incorrect supply voltage, 

the use of extensions cords, low voltage, or unstable supply voltage.

WARRANTY DOES NOT COVER

 periodical maintenance, installation, set up of the equipment, and cable change.

Warranty does not cover standard wear parts or parts which are considered as consumables by the standards of the manufacturer, 

such as lamps, glass, plastic (handles etc.), rubber, locks, wheels etc. 

This warranty does not narrow the buyer`s legal rights, which are determined by law.

Seller assumes no responsibility and will accept no claims nor any charges in connection with any repairs of a non-warranty case. 

Buyer must reimburse the service for labour, travel costs and other related expenses of non-warranty repairs by his own cost.

Summary of Contents for ND140M

























Reviews: