JUKA ADI125, Instruction Manual, Page: 24 / 27

24
condenser temperature does not normalize, the alarm will be triggered)
. (Applies to CAREL thermostat) The thermostat displays E0/E1/L0/HI/EE/Ed/DF instead of temperature:
•
E0 - temperature sensor inside the chamber is damaged - contact an authorized service;
•
E1 - evaporator sensor is damaged - contact an authorized service.
ATTENTION! Noise produced by equipment during operation is a normal phenomenon. The equipment contains fans, motors
and compressors that turn on and off automatically. Each compressor generates a certain level of noise during operation. These
sounds are created by the unit's motor and the refrigerant moving through the circuit. This phenomenon is a technical property
of the refrigeration equipment and is not a sign of malfunction.
If, after checking the items mentioned above, the equipment does not work correctly, contact JUKA Technical Center, indicating the
data from the nameplate.
JUKA service center phone number: +38 (097) 524 84 11
e-mail: service@juka.ua
7. DISPOSAL
In cases where the equipment becomes unusable, it must be disposed of. Disposal must be carried out in accordance with the rules and
regulations in force in each individual country. It is advisable to contact authorized disposal companies that are engaged in the disposal of
the respective equipment in an environmentally friendly manner.
ATTENTION! ALL DISPOSAL OPERATIONS AS WELL AS THE TRANSPORT AND HANDLING OF WASTE MUST BE
PERFORMED ONLY BY SPECIALISTS AND AUTHORIZED PERSONNEL.