juju Eat & Twist, User Manual

Page: 10 / 33

Page 1 0
Transforming the baby high chair into a child seat
1. Carrefuly adjust the seat belts on each side until they fit the child.
2. Insert the 2 small side safety buckles into the master central buckle until you
hear the "click" sound.
3. To open the buckle, press the middle button of the center buckle and
the buckles will pop up automatically. (Fig. C1)
Repeat steps from 1 to 3 using the short legs in the box until it looks same
as in F ig D1. Then continue with step 4 and you will get the child seat (Fig D2).
Changing to booster seat
Under the turntable, unscrew the 4 small screws from the ends of the supports
and the m edium screw in the middle using the inner hexagonal tool and remove
the seat togheter with the turntable. The booster can be attached to an adult
seat using the two A17 seat belts.
Install the booster on a suitable seat, the minimum dimensions are those in Fig
E2. Using the seat belts, secure the bottom and back of the booster seat to the
adult seat. Attach the belt buckles and tighten them by pulling on the free end.
The 2 seat belts must be tightened at the back and the seat and not be left loose.
360 Rotation of the dining chair
Press the rotation button on the front of the turntable and then rotate the top of
the seat until the desired position is reached . There are 8 positions. The chair
must be rotated carefully and , in case it b locks , stop and che ck the reason why.
Then try again. (Fig. F1)
Safety Belt
Caution: To prevent the child from slipping out of the high chair, make sure
the safety belts are used at all times.